The F2 Carbon

Power

Rotax ACE 3-Cylinder 4 Stroke

300 HP Supercharged

200.6 LBS

298 LBS

8000 RPM

3.16 lb/HP (fully rigged)

ACE (Advanced Combustion Efficiency)

3 Yrs or 450 Hours

Engine

Max Horse Power

Weight

Total engine weight w/ pump

Performance / RPM

Power-to-weight ratio

Technology

Warranty

Performance

60 mph (without performance upgrades)

1.9 Seconds

4.7 Seconds

0.5 Tenths of a second

1.8 Seconds

6 - 7” with two anglers

Max Speed

0 - 30 Mph

0 to 50 Mph

0 to plane or on step

20 to 50 mph

Draft

19.2 Ft

80 Inches

19 Inches

65 Inches

12 - Degree / Variable

450 LBS

975 LBS

Length

Beam Width

Height

Bottom Width

Deadrise

Weight Before Rigging

Fully Rigged Weight

Specifications

Construction

Performance-optimized Structural Design utilizing Carbon Fiber, Divincel Core and Basalt

Capacities

Forward Box Stabilized Carbon Fiber

2 Stabilized Carbon Fiber Aft Boxes

Removable Engine Hatch

Fuel Tank

25.6 Cu Ft

5 Cu Ft per box

48” x 36” of access to the engine

36 gallon proprietary fuel tank

Fuel Consumption

Cruise at 30 mph

Cruise at 40 mph

Cruise at 50 mph

Wide Open Throttle 60 mph

6.1 MPG

4.8 MPG

3.0 MPG

2.3 MPG

Instrumentation

The 8” Medallion touch screen runs all engine vitals and interfaces with electronics

12” Sim rad NSS12 Evo3 S Multifunction Display with US C-MAP Charts

CZone interface with Simrad for all touchscreen control boat switches

Other Features

  • Industry-first hidden, hinge-less carbon fiber trim tabs. Unique system employs internally mounted Lectro Tab actuators and a compliant-flexure plate design (hinges aren’t needed because the tabs are the hinges). Flush, protrusion-free design improves performance and maneuverability both under power and when poling.

  • 3 fully integrated modular push pole holders that are also docking and anchor tie-offs  

  • Edson® and Schmitt  “Power Wheels” with integrated stainless knot pull loop  

  • INR system Intelligent Neutral reverse Steering 

  • IDF system Intelligent Debree Free system ( Reverses engine and pump to remove weeds ) 

  • Epoxy and Vinylester Resins are used in the build process and High-performance marine UV-stabilized gel coat  

  • 100% Carbon Fiber, Divinicell core, and Basalt Fiber hull

  • Vacuum Infused Core Cell™ construction throughout the entire structure

  • Heavy-duty rub rail

  • Easy Clean nonskid ( Custom color Nonskid available )

  • Rip Curl Spray rails integrated into the hull.  

  • 9’.10” Rod racks with rod tubes for 8 rods as well as spinning Rods and Reels 

  • Anodized poling platform with Aqua Traction top

  • Stand-up Bar Receiving tubes in the platform 

  • Bilge pump, Rule® automatic 1100 GPH

  • 11 Gallon Crab, Shrimp, and Bait Livewell plumbed with pump  (800 GPH)

  • ½” Super flex watertight hatch gaskets 

  • Whitewater Inc. custom Gas Shocks on all hatches 

  • Aqua Traction Fly rod/reel protectors and custom flooring 

  • Yeti 45 Qt Cooler 

  • custom cushions for Yeti Cooler 

  • Backrest cushion for the console 

  • Rear bench cushion with proprietary foam for better longevity and memory

  • Running lights/Livorsi LED

  • Lithium Smart Battery with boost pac and lithium charger standard.

  • 6 flush mounted push button tie-off cleats 2 forward 2 mid and 2 aft 

  • Custom Livorsi side mount electronic throttle binnacle ( electronic shift controls ) 

  • 3 high-quality welded stainless tiedown 1 forward 2 aft  

  • Custom black polished acrylic helm door with intake ventilation and Gemlux latch

Aluminum Trailer

  • Custom Super Dry Launch aluminum I-beam trailer 

  • Mag wheel includes a hub and spare tire,

  •  LED lights, 2

  • 3  mag wheels

  • Swing tongue located under the bow for minimum length for garage clearance ( 19ft.5”) 

  •  Fly Boatworks custom low rider fenders ( color option available )